Manual cutting machine - List of Manufacturers, Suppliers, Companies and Products

Manual cutting machine Product List

1～3 item / All 3 items

Displayed results
Manual Cutter "METACUT-302" [Demo unit available!]

Manual Cutter "METACUT-302" [Demo unit available!]

It is a simple and easy-to-use manual sample cutting machine. It is designed for cutting metal, non-ferrous metals, and iron materials for organizational observation. It can also cut long samples.

This is a manual cutting machine that minimizes functions other than the cutting mechanism, allowing for high-quality precision cutting with a simple structure. It offers excellent cost performance and does not take up much space. We have a demo machine available, so please feel free to contact us if you would like a demonstration. Online demos and on-site demos at your company are also possible. 【Features】 ■ Cutting starts with just an ON/OFF operation. ■ The interlock safety device ensures that the motor does not start until the hood is closed, and the hood cannot be opened until the motor stops, providing a safe design. ■ Long pipes can be accommodated by opening the side window. ■ The one-touch clamp is secured simply by lowering the lever. ● For more details, please request materials or download the catalog.

  • Geological Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brick Wet Manual Cutting Machine NC-85-550, Three-phase 200V 4kW

Brick Wet Manual Cutting Machine NC-85-550, Three-phase 200V 4kW

It is a wet-type upper blade cutting machine for refractory bricks and similar materials.

■Dimensions: 1370x670x1450mm, 115kg ■Motor: Three-phase 200V, 4kW, 1400/1700min-1 (50Hz/60Hz) ■Maximum cutting length: 500mm with Φ525mm blade installed ■Maximum cutting thickness: 190mm with Φ550mm blade installed ■Blade diameter used: Φ400 to Φ550mm, shaft diameter 40mm ■Blade cooling: Circulation type with a small pump in the table tank ■Made in Italy

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brick Wet Manual Cutting Machine NC-EX750-5.5kw

Brick Wet Manual Cutting Machine NC-EX750-5.5kw

Brick cutting machine with a maximum cutting thickness of 280 mm (30 inches when in use).

■Overall dimensions: 1600 (excluding push handle) x 850 x 1600 mm, 250 kg ■Motor: Three-phase 200V, 5.5 kW, 12A, 1400/1700 min-1 (50Hz/60Hz) ■Blade diameter: Φ500 to Φ750 mm (20 to 30 inches), hole diameter Φ40 mm ■Motor shaft vertical range: Maximum 480 mm, minimum 245 mm from the table surface *The blade rises and falls vertically on the support column *Blade height adjustment is fixed by screws, so it cannot be adjusted during cutting ■Maximum cutting dimensions: When using a 30-inch blade, thickness 280 mm, length 465 mm *As the blade diameter decreases, the processing thickness decreases and the processing length increases ■Effective table size: 815 x 506 mm, material can be fixed with magnets ■Blade cooling: Circulation type by a small pump in the tank under the table ■Variable spindle rotation with 5.5 kW inverter included

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.